Disclaimer | This article may contain affiliate links, this means that at no cost to you, we may receive a small commission for qualifying purchases.
Have you been looking for a good alternative to purchasing bottled water? You may have considered water filtration systems as the prime candidate for replacing your current system.
Why? Well, because these systems purify your tap water by filtering out as much as 99.9% of the impurities such as viruses, bacteria, fluoride, chlorine, and lead. At the end of it all, you will get safe and clean drinking water for you and your loved ones.
Now, whenever someone makes a water filtration system comparison, two products always seem to stand out – Top Tier APEC vs. iSpring RCC7. Both of these highly effective water filtrations systems have a 5-stage filtration system, which is very effective in ensuring safe and clean drinking water in your home.
Which one is better? We asked our experts the same question. Let’s look at what they found.
APEC vs. iSpring RCC7 | Water Filtration Comparison
The First Stage of Filtration
In the first stage of the 5-stage filtration process, APEC works with a high-capacity sediment filter. Rust, dirt, and particles larger than 5 microns will be blocked very efficiently with the help of a polypropylene depth filter. APEC claims that this strategy will prove to be a better alternative to resin-bonded and sting-wound filters.
Other than the simple purification of water, the designs in the APEC have been found to extend the water filtration’s life. This is because all the potentially damaging particles that enter this system are blocked out before the next stage.
This water filtration system works, more or less, in the same manner. There is, however, only a small difference. For the first stage of the system, this product relies on polypropylene sediment for stripping all the dirt and particles that are about 5 microns in size.
The only difference, however, is that the iSpring RCC7 has a transparent outer casing for its filter. This would allow users to visually inspect the filter and determine whether it needs to be replaced or it can go on for a few days.
In this first-stage water filtration system comparison, you’ll find that both products work with an above-average filter that removes rust, dirt, and other impurities from entering the second stage. The iSpring, however, comes out triumphant here due to the transparent casing, which makes changing water filters easy.
The Second and Third Stage of Filtration – Carbon-Based Filtration
In these stages of the water filtration process, APEC uses a double-carbon filter. The company explained that activated carbon particles are fused in a manner to form something like a wooden block. These blocks of carbon work in a manner that they have maximum contact with the tap water as it passes on through.
This whole process is where the water loses its chlorine and several chemicals. Not only will this result in very clean drinking water, but it would also mean that the water passing through your system is safe for your plumbing components. Lastly, this part of the process also removes colors, cloudiness, and unpleasant odors from the water passing through.
So, where does that leave its competitor in this water filtration system comparison? Well, the iSpring uses a carbon block filter and granular activated charcoal filter instead. According to the manufacturers of this product, these features are much better than have two carbon block filters.’
Have a free-floating carbon block as the second filter works in such a manner that it strips the water off bigger particles while the third filter has an easy time removing smaller impurities. This results in extending the entire water filtration system’s life while also protecting the RO membrane.
Both systems are effective in this part of the process, but they both use different methods to get there. There isn’t a clear winner here because they both were found successful in removing big particles along with rust and dirt.
The Fourth Stage–Reverse Osmosis Filter
The very crux of this system comes in the shape of the reverse osmosis membrane in this system. It helps remove as much as 99% of the dissolved solids alongside contaminants such as viruses, bacteria, radium, copper, chromium, fluoride, lead, arsenic, and about 100 other impurities. This is where all the main filtration of the system occurs, and it results in safe, clean, and tasty water for your loved ones.
Our experts couldn’t find any significant differences here as the iSpring also uses the same reverses osmosis membrane. The membrane of this system makes sure that only the water molecules are allowed to pass, while everything larger than 0.0001 microns is barred. What’s more? The 75 gallons per day capacity makes sure that the system has a capacity that is sustainable for a larger family.
Both these products have an effective reverse osmosis filter, and both of them were found to be very effective in removing most of the pollutants in tap water. The iSpring had the upper hand, however, because of its filtration capacity of larger gallons. The result for both these filtration systems was safe and healthy bottled water, so the verdict for you is based on how much drinking water you need daily.
System Assembly Difficulty and Final Brush Filter
This product uses a coconut shell for the very last stage of its purification process. Here, the filters will be able to clear out any residual taste from the water tank alongside adding a little softness.
If you are concerned about the assembly of this product, you will be able to find detailed instructions or multiple video instructions that make the set up of this system very easy. The tubings of this product are made up of high-quality materials that ensure your tank doesn’t have leaks or for contaminants to have a way inside.
In contrast, the iSpring uses yet another granular activated charcoal filter for its final stage. When water passes through here, you will be able to experience crystal clear water which is completely tasteless and odorless – just as it was meant to be.
The initial set up of this product will take up at least 1 or 2 hours of your weekend, although some basic plumbing knowledge is necessary here. There are clear video and text instructions for the installation process of this product. Still, we would recommend that a more experienced individual or expert should help you out here.
In the final filtration stage, both of these processes successfully clear the water from any residual tastes. Both these systems have great instructional videos for the installation process and can easily fit underneath the kitchen sink. The iSpring, however, may need a set of experienced hands, but that shouldn’t count against the product itself.
If you have ever wanted to know what a truly worthy investment for your home looks like, well, this was it. Both these water filtration systems can bring about daily access to tasty, safe, and clean drinking water. You don’t have to blow a hole in your wallet looking for bottled water.
Whether for cooking or drinking purposes, both of these water filtration systems can be set up easily in your home and will keep on serving you for a very long time. Even their individual prices make them very affordable choices!